JTW stainless steel metal hose "TS pressure pipe production license"

Shanghai Songjiang absorber group limited official website to introduce information: JTW stainless steel metal hose TS pressure pipe production license, Songjiang group for a number of supporting pipes of stainless steel metal hose products, mainly to settlement, deflection, bending, vibration and other effects, protect the long-term safe operation of the pipeline system.

由于制作软管主要零件的材料是采用奥氏体不锈钢,因而保证了软管优良的耐温性和耐蚀性,软管的工作温度范围.广,为 -196—600 度,使用的软管按管道所通介质的腐蚀性抉择适用的不锈钢*号,即可保证软管的耐蚀性。
Performance introduction of JTW stainless steel metal hose:
The main parts of production material is austenitic stainless steel hose, thus ensuring the heat resistance and excellent corrosion resistance of the hose, the hose working temperature range is very wide, , use the hose on pipeline through corrosion for stainless steel plates, to ensure that the corrosion resistance of hose.
The 1. metal hose is made of 1Cr18Ni9Ti stainless steel, which has strong corrosion resistance.
The 2. hose body is thin-walled stainless steel tube hydroforming. It has strong flexibility, flexibility, bending and anti vibration ability, strong protection of the woven mesh sleeve, so that it has higher bearing capacity.
The connection between the two ends of the 3. hose can also be made into other connecting methods other than the thread and flange standard, which is convenient for connection and use.
4. the product is not only suitable for the matching of rotary joint, but also widely used in the soft connection of a variety of fluid media. Corrosion resistance, high temperature resistance, low temperature resistance , light weight, small volume and good softness. Widely used in aviation, aerospace, petroleum, chemical, metallurgical, power, paper, wood, textile, construction, medicine, food, tobacco, transportation and other industries.
Mechanical damage flange seal face.

Two, JTW type stainless steel metal hose advantages:
1, flexible hose between the metal hose pitch, and the bending radius is small.
2, the metal hose has good scalability, no blocking or rigid.
3. The weight of the metal hose is light and the caliber is consistent well.
4, soft, flexible, flexible, flexible, flexible.
5, the metal hose is resistant to corrosion and high temperature resistance.
6, metal hose anti mouse bite, wear resistance, prevent the internal wire from wear.
7, metal hose bending resistance, tensile properties, anti lateral pressure resistance.
8, the metal hose is soft and smooth, easy to wear line installation and positioning.
9. The flexible hose fittings of the metal hose are easy to connect with the instrument and equipment.
1、螺纹式: 通径为50毫米以下的金属软管的接头,在承受较高工作压力的情况下,多以螺纹式为主,当拧紧螺纹以后,两个接头上的内、外锥度面紧密配合,实现密封。锥角 *般为60度,也有用74度的。该结构密封性好,但安装时必须保证两个对接件的同心度。为了解决实际工程中经常见到的反复拆、装和不易同心等问题,也可以 将接头设计成锥面与球头的配合。
2、法兰盘式:通径为25毫米以上的金属软管的接头,在承受*般工作压力的情况下,以法兰盘式为主,它以榫槽配合的形式进行密封。可沿径向转动,也可沿 轴向滑动的活套法兰盘在紧固螺栓拉力的作用下连接两体。该结构密封性能良好,但加工难度大,密封面容易碰.。在需要快卸的.殊场合,可以将固紧螺栓通过的 孔划开,制成快卸式法兰盘。
3、快速式:通径为100毫米以下的各种金属软管的接头,在要求快速装卸的使用条件下,*般采用快速式。它常用氟塑料或.种橡胶制成的“O”形密封圈 密封。当手把搬动*定的角度以后,相当于多头螺纹的爪指被锁紧;“O”形密封圈被压得越紧,其密封性能越好。该结构在火场、战地及其它必须快装快卸的场合 .为适宜。在几秒钟的时间内,不需配用任何专用工具,就可以对接或拆开*组接头。
Three, JTW type of stainless steel metal hose link:
1, thread type: the joint of metal hose with a diameter of less than 50 millimeters is mainly threaded. Under the condition of high working pressure, the inner and outer taper surfaces of the two joints are closely matched to achieve the seal after tightening the thread. The cone angle is generally 60 degrees and also useful in 74 degrees. The structure is well sealed, but the concentricity of the two butt parts must be ensured when the installation is installed. In order to solve the problems that are often seen in the actual project, such as repeated dismantling, loading and not easy to be concentric, the joint can be designed to match the cone with the ball head.
2, flange plate: a metal hose joint with a diameter of 25 millimeters. Under the general working pressure, it is mainly made of flanges, and it is sealed in the form of tenon grooves. The two body is connected under the action of the fastening bolt pulling force, which can be rotated along the radial direction and can also be slid along the axial direction. The structure has good sealing performance, but it is difficult to process, and the seal face is easily bruised. Special occasions in need of quick release, can be cut through the bolt fastening holes, made quick detachable flange.
3, fast type: the joint of all kinds of metal hose with the diameter of less than 100 millimeters is generally used fast under the condition of demanding fast loading and unloading. It is often used to seal the "O" - shaped seal made from fluoroplastics or special rubber. When the hand moves a certain angle, the claw, which is equivalent to the multi head thread, is locked; the tighter the "O" ring is pressed, the better its sealing performance. The structure is most suitable for fire, battlefield and other occasions which must be quickly loaded and unloaded. In a few seconds, a group of joints can be butted or disassembled without the need for any special tools.
Four, JTW type stainless steel metal hose installation method
Although the metal hose is compressible and stretchable, it will quickly break and reduce the if it is not installed in the correct position.
The hose can be installed horizontally or vertically or vertically. The most ideal state is vertical installation. At the same time, it should avoid installing near the wheel, and install baffle when necessary.
General can be divided into 3 kinds of metal hose length: first compression length, which is compressed to the limit position of the hose length; the second is to install length, which is in the middle position of the half length of the hose of the maximum displacement; third is the stretched length of the hose is stretched to the maximum when the length of.
When the hose is installed, the hose should be in the middle position, that is, the so-called installation length. When installed in this position, there will be 2 moving directions when the hose is subjected to axial load. Otherwise, if it moves in 1 directions, it will affect the strength and reduce the of the metal hose.
In the actual installation process, considering that the length of hose should be measured according to the result of the ruler, then the installation may affect the production efficiency. Some foreign producers directly install the ruler on the hose and cut the ruler after installation.
1, in the selection of metal hose, for easy installation, please choose a metal hose with a loose flange at one end as much as possible.
2, the surface of metal hose should be protected during the welding operation on the construction site, so as to prevent welding slag and metal hose with arc ignition.
3. The metal hose is strictly forbidden to be twisted and installed.
4, should not bend along the root of a metal hose, and should not have a dead bend.
5, through the medium of corrugated pipe material has no corrosion, chloride ion content in the medium should be less than 25PPM
6, the installation of the correct installation method is strictly installed. (see Installation Guide)
7. Strictly prohibit the seal face of mechanical damage flanges.

Related links

·整批螺纹橡胶接头发货现场“高品质” ·液压橡胶管接头在风力发电的作用
·如何打造海洋极地世界维生系统? ·Demag住友德马格创于德国:注塑机制造商
·美国PROCO膨胀节PROCO补偿器“补偿管道偏离偏距” ·【青海珠峰冬虫夏草工厂】金属软管合同
·三种有效水质处理方式:游泳池水处理系统 ·橡胶接头工厂事故应急池推荐
·小区变压器太吵睡不好怎么办?降噪神器矩阵式减震器 ·【大连湾刘屯旧区改造项目】变压器减震器合同


XML 地图 | Sitemap 地图